Built for high-end residential and light commercial applications,PGA series valves are the toughest, most reliable valves in their class.These long-lasting, easy-to-service valves are proven to perform at the highest level, even under harsh temperatures and intense pressure.
REal time field
Extreme Durability
The PGA valve maintains a strong, worry-free seal between the body and bonnet, no matter the conditions.
Pressure-Resistant Seal
The PGA valve’s body-to-bonnet seal is built to overcome the intense water pressure.Faced with repeated pressure surges.
Easy Maintenance
Multi-drive screws make servicing the PGA valve simple and convenient to get things done faster.
Quiet Performance
With a robust electrical design, the PGA valve greatly reduces noise and delivers years of reliable performance.
Description
Reliability
- Water-tight seal between the body and bonnet for maximum confidence, even in the most extreme conditions.
- Robust construction and electrical design for quiet performance you can count on.
- Rugged PVC and glass-filled nylon construction for reliable operation.
- Normally closed, forward flow design.
- Filtered pilot flow to resist debris and clogging.
- Slow closing to prevent water hammer and subsequent system damage.
Ease of Use
- Globe and angle configuration for flexibility in design and installation.
- Manual internal bleed operates the valve without allowing water into the valve box. This allows the pressure regulator to be adjusted without turning the valve on at the controller.
- One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service.
- Non-rising flow control handle adjusts water flow as needed.
Versatility
- Accommodates optional, field-installed PRS-D pressure regulating dial to ensure optimum sprinkler performance.
- Accepts latching solenoid for use with battery-operated controllers.
- Optional purple flow control handle for non-potable water applications PGA-NP-HAN1 (1″ and 1½”); PGA-NP-HAN2 (2″).
- Pressure: 15 to 150 psi (1,04 to 10,4 bar)
- Flow without PRS-D option: 2 to 150 gpm (0.45 to 34.05 m3/h; 7.8 to 568 l/m)
- Flow with PRS-D option: 5 to 150 gpm (1.14 to 34.05 m3/h; 19.2 to 568 l/m)
- Water temperature: Up to 110°F (43°C)
- Ambient temperature: Up to 125°F (52°C)
- 24 VAC 50/60 Hz (cycles per second) solenoid power requirement
- Inrush current: 0.41A (9.9VA) at 60Hz
- Holding current: 0.14A (3.43VA) at 60Hz
- Solenoid coil resistance: 30-39 Ohms, nominal
- 100-PGA: 7¼” x 5½” x 3¼” (18,4 cm) x (14,0 cm) x (8,3 cm)
