brightness_1Water-tight seal between the body and bonnet for maximum confidence, even in the most extreme conditions.
brightness_1Robust electrical design for quiet performance you can count on.
brightness_1Rugged PVC and glass-filled nylon construction for reliable operation.
brightness_1Normally closed, forward flow design.
brightness_1Filtered pilot flow to resist debris and clogging.
brightness_1Slow closing to prevent water hammer and subsequent system damage
brightness_1Globe and angle configuration for flexibility in design and installation.
brightness_1Manual internal bleed operates the valve without allowing water into the valve box. This allows the pressure regulator to be adjusted without turning the valve on at the controller.
brightness_1One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service.
brightness_1Non-rising flow control handle adjusts water flow as needed.
brightness_1Accommodates optional, field-installed PRS-D pressure regulating dial to ensure optimum sprinkler performance.
brightness_1Accepts latching solenoid for use with battery-operated controllers.
brightness_1Optional purple flow control handle for non-potable water.
brightness_1Multi-drive screws (Phillips, flathead, hexagonal) for easy maintenance.
|Valve Size||2 in|
|Valve Inlet/Outlet Configuration||NPT Female x NPT Female Threaded|
|Valve Options||Multi-drive Screws, Non-potable|
|Operating Temperature||Temperature: Upto 110°F(43°C)|
|Dimensions||7 1/4" x 5 1/2" x 3 1/4" (18,4 cm) x (14,0 cm) x (8,3 cm)|
|Electrical Specifications||24 VAC 50/60 Hz (cycles per second) solenoid
Inrush current: 0.41A (9.9VA)
Holding current: 0.14A (3.43VA)
Coil resistance: 30-39 Ohms
|Flow Range||Flow without PRS-D option: 2 to 150 GPM (0,5 to 34 m3/h; 0,13 to 9,44 l/s)
Flow with PRS-D option: 5 to 150 GPM (1 to 34 m3/h; 0,32 to 9,44 l/s)
|Operating Pressure||15 to 150 psi (1,0 to 10,4 bar)|
brightness_1200-PGA: 10" x 7¾" x 5" (25,4 cm) x (23,5 cm) x (12,7 cm)