Solenoid Valve

150 PGA 1.5 inch

Built for high-end residential and light commercial applications,PGA series valves are the toughest, most reliable valves in their class.These long-lasting, easy-to-service valves are proven to perform at the highest level, even under harsh temperatures and intense pressure.

Product Image

Extreme Durability

The PGA valve maintains a strong, worry-free seal between the body and bonnet, no matter the conditions.


Pressure-Resistant Seal

The PGA valve’s body-to-bonnet seal is built to overcome the intense water pressure.Faced with repeated pressure surges.


Quiet Performance

With a robust electrical design, the PGA valve greatly reduces noise and delivers years of reliable performance.


Easy Maintenance

Multi-drive screws make servicing the PGA valve simple and convenient to get things done faster.


  • brightness_1Water-tight seal between the body and bonnet for maximum confidence, even in the most extreme conditions.

  • brightness_1Robust electrical design for quiet performance you can count on.

  • brightness_1Rugged PVC and glass-filled nylon construction for reliable operation.

  • brightness_1Normally closed, forward flow design.

  • brightness_1Filtered pilot flow to resist debris and clogging.

  • brightness_1Slow closing to prevent water hammer and subsequent system damage.

Additional Features

  • brightness_1Globe and angle configuration for flexibility in design and installation.

  • brightness_1Manual internal bleed operates the valve without allowing water into the valve box. This allows the pressure regulator to be adjusted without turning the valve on at the controller.

  • brightness_1One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service.

  • brightness_1Non-rising flow control handle adjusts water flow as needed.

  • brightness_1Accommodates optional, field-installed PRS-D pressure regulating dial to ensure optimum sprinkler performance.

  • brightness_1Accepts latching solenoid for use with battery-operated controllers.

  • brightness_1Optional purple flow control handle for non-potable water.

Valve Size 1.5 in
Valve Type Inline
Material Plastic
Valve Inlet/Outlet Configuration NPT Female x NPT Female Threaded
Valve Options Multi-drive Screws, Non-potable
Valve Series PGA
Operating Temperature Temperature: Upto 110°F(43°C)
Dimensions 7 1/4" x 5 1/2" x 3 1/4" (18,4 cm) x (14,0 cm) x (8,3 cm)
Electrical Specifications 24 VAC 50/60 Hz (cycles per second) solenoid
Inrush current: 0.41A (9.9VA)
Holding current: 0.14A (3.43VA)
Coil resistance: 30-39 Ohms
Flow Range Flow without PRS-D option: 2 to 150 GPM (0,5 to 34 m3/h; 0,13 to 9,44 l/s)
Flow with PRS-D option: 5 to 150 GPM (1 to 34 m3/h; 0,32 to 9,44 l/s)
Operating Pressure 15 to 150 psi (1,0 to 10,4 bar)
  • brightness_1150-PGA: 8" x 6¾" x 3½" (20,3 cm) x (17,2 cm) x (8,9 cm)

Product Enquiry