Solenoid Valve

100 PGA 1 inch

Built for high-end residential and light commercial applications,PGA series valves are the toughest, most reliable valves in their class.These long-lasting, easy-to-service valves are proven to perform at the highest level, even under harsh temperatures and intense pressure.

Extreme Durability

The PGA valve maintains a strong, worry-free seal between the body and bonnet, no matter the conditions.

Pressure-Resistant Seal

The PGA valve’s body-to-bonnet seal is built to overcome the intense water pressure.Faced with repeated pressure surges.

Easy Maintenance

Multi-drive screws make servicing the PGA valve simple and convenient to get things done faster.

Quiet Performance

With a robust electrical design, the PGA valve greatly reduces noise and delivers years of reliable performance.

Description

Reliability

  • brightness_1Water-tight seal between the body and bonnet for maximum confidence, even in the most extreme conditions.

  • brightness_1Robust construction and electrical design for quiet performance you can count on.

  • brightness_1Rugged PVC and glass-filled nylon construction for reliable operation.

  • brightness_1Normally closed, forward flow design.

  • brightness_1Filtered pilot flow to resist debris and clogging.

  • brightness_1Slow closing to prevent water hammer and subsequent system damage.

Ease of Use

  • brightness_1Globe and angle configuration for flexibility in design and installation.

  • brightness_1Manual internal bleed operates the valve without allowing water into the valve box. This allows the pressure regulator to be adjusted without turning the valve on at the controller.

  • brightness_1One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service.

  • brightness_1Non-rising flow control handle adjusts water flow as needed.

Versatility

  • brightness_1Accommodates optional, field-installed PRS-D pressure regulating dial to ensure optimum sprinkler performance.

  • brightness_1Accepts latching solenoid for use with battery-operated controllers.

  • brightness_1Optional purple flow control handle for non-potable water applications PGA-NP-HAN1 (1" and 1½"); PGA-NP-HAN2 (2").

  • brightness_1Pressure: 15 to 150 psi (1,04 to 10,4 bar)

  • brightness_1Flow without PRS-D option: 2 to 150 gpm (0.45 to 34.05 m³/h; 7.8 to 568 l/m)

  • brightness_1Flow with PRS-D option: 5 to 150 gpm (1.14 to 34.05 m³/h; 19.2 to 568 l/m)

  • brightness_1Water temperature: Up to 110°F (43°C)

  • brightness_1Ambient temperature: Up to 125°F (52°C)

  • brightness_124 VAC 50/60 Hz (cycles per second) solenoid power requirement

  • brightness_1Inrush current: 0.41A (9.9VA) at 60Hz

  • brightness_1Holding current: 0.14A (3.43VA) at 60Hz

  • brightness_1Solenoid coil resistance: 30-39 Ohms, nominal

  • brightness_1100-PGA: 7¼" x 5½" x 3¼" (18,4 cm) x (14,0 cm) x (8,3 cm)

Product Enquiry